Product Introduction

About DS200SDCIG1ABA
The GE DC Power Supply and Instrument Panel DS200SDCIG1ABA serves as an interface to the DC2000 drive in its larger Mark V Turbine Control System series. As you can certainly tell from its name extension, the Mark V series to which this DS200SDCIG1ABA PCB belongs has specific applications in control and management systems for wind, steam, and gas turbine automated drive components, although it is also considered a legacy series for General Electric due to the original retailer eventually ceasing production. The Mark V Turbine Control System series to which this DS200SDCIG1ABA PCB belongs, while a legacy series, is also considered one of the last of General Electric's product lines to use the patented Speedtronic control system technology in its various products. While this DS200SDCIG1ABA printed circuit board, or PCB for short, can be defined as a DC Power Supply and Instrument Panel, it is not an original Mark V series product with this functionality; that would be a DS200SDCIG1ABA printed circuit board lacking the three revision history of this DS200SDCIG1ABA PCB.

Hardware Tips and Specifications

This DS200SDCIG1ABA printed circuit board gets the functionality of a DC power supply and dashboard thanks to the adoption of several unique and important hardware components and component specifications. First, this DS200SDCIG1ABA PCB assembly features many of the Mark V series standardized voltage-limiting hardware components, including various rectifiers, diodes, capacitors, and integrated circuits. Beyond that, all of the DS200SDCIG1ABA hardware components and set specifications on its base circuit board are well protected by its thick, basic standard PCB coating that wraps and protects the individual DS200SDCIG1ABA board hardware components based on functional priority. Additionally, this DS200SDCIG1ABA product assembly also offers multiple fuses and jumpers; each with its own instruction manual that explains its application. The fuses in this DS200SDCIG1ABA PCB assembly include:

FU1 115 V AC Power Supply Fuse
FU2 DC Signal Level Power Supply Fuse
FU3 DC Signal Level Power Supply Fuse
FU5 Internal NRX 10 A Field/MOV Assembly Fuse
FU6 Internal NRX 10 A Field/MOV Assembly Fuse
All of these fuses listed in the DS200SDCIG1ABA DC Power Supply and Dashboard Assembly are named by a combination of their originally intended function and factory printed nomenclature. A total of three jumpers are provided for this DS200SDCIG1ABA PCB assembly in the JP1 MD Control Source Jumper, JP2 MA AC Contactor Release Time Jumper, and SW1 Select AC Line CT Load as a Function of Nominal DC Output Current Jumpers. Like the fuses listed above, these jumpers within the DS200SDCIG1ABA printed circuit board internal components are named by a combination of their respective labels and their selection for specific functions of the larger DS200SDCIG1ABA board and the Mark V Series automated drive. The jumpers and fuses applicable to this DS200SDCIG1ABA product assembly are not physically grouped together on the DS200SDCIG1ABA PCB substrate; rather, they are applied as needed for functionality.

Repairs and scheduled maintenance of the DS200SDCIG1ABA should only be performed by qualified personnel. That is, due to the high voltages present in the drive and circuit boards, do not attempt to remove and replace the circuit boards yourself. You could unknowingly damage the circuit boards if you allow the circuit boards to contact components in the drive enclosure, or you could damage the cables if you use an incorrect method to remove them. There is one troubleshooting task you can perform yourself. You can open the enclosure and view the LEDs on the circuit boards with power applied to the drive and circuit boards. If the LEDs are illuminated, it means that the fuse associated with the LEDs has blown. However, you cannot touch the circuit boards or any components in the drive. If you see that the fuse is blown and you want to remove the board, you must follow these steps. Not only must you shut down the drive, you must also remove the fuses on the three-phase power supply. Also make sure to remove the auxiliary power supply. Wait a few minutes for the power to exit the board. Use a test device to verify that there is no power in the board before proceeding.

Frequently Asked Questions About the DS200SDCIG1ABA
Can connections on the DS200SDCIG1ABA be removed while the DS200SDCIG1ABA is running?
No, you should not remove connections or boards on the DS200SDCIG1ABA or reinsert them into the DS200SDCIG1ABA while it is powered. If you do this, you may damage the DS200SDCIG1ABA device.
What is the JP1 jumper on the DS200SDCIG1ABA?
Jumper JP1 on the DS200SDCIG1ABA is the MD control source jumper, which allows the MD contactor drive hardware outputs to be slaved to the MA contactor drive hardware outputs on the DS200SDCIG1ABA. Normally on the DS200SDCIG1ABA, the MD contactor drive outputs are independently controlled by the MCP software.
What is the DS200SDCIG1ABA used for?
The DS200SDCIG1ABA is used to provide logic power and interface circuits for DC2000 drives with input voltages up to 600 VAC.
Where can I find the manual for the DS200SDCIG1ABA?
We can send you a link to the DS200SDCIG1ABA manual. The DS200SDCIG1ABA manual is the GE Drive Systems SDCI DC Power Supply and Instrument Panel Replacement Procedures manual, which is specific to the DS200SDCIG1ABA. You can also receive a paper copy of the DS200SDCIG1ABA manual upon request.

The DS200SDCIG1ABA has been carefully designed to meet the stringent requirements of industrial control systems, providing unmatched reliability and efficiency.

Using advanced circuitry and high-quality materials, it ensures stable power delivery in a wide range of applications, thereby improving system performance and uptime.

The board is equipped with customizable jumper connections, providing flexible configuration options, allowing seamless integration into a variety of control systems.

It operates over a wide temperature range and withstands harsh industrial conditions, ensuring reliable operation in a variety of environments.

Full compatibility with GE's Mark V DS200 Series makes it a perfect upgrade or replacement option for existing systems and easy to maintain and optimize.

Experience the peace of mind that comes with using genuine GE components and enjoy industry-leading support and warranty to ensure your industrial operations run smoothly.

I think you'll find our product offers great value for money！

It's my pleasure to introduce our latest product, which will be a great addition to your current offerings！

We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly！

We believe this product can help to expand your market share. We look forward to the opportunity to work with you！

We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day！

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

.Technical Team Service Hotline：wujinghan102@gmail.com     +86 13376990653

                                                         csyili980622@gmail.com        +86 13306931261