Product Introduction

The IC693DNM200 is a DeviceNet Master Module. This module is a single slot communication module that is part of the 90-30 Series Programmable Logic Controller (PLC) platform, formerly manufactured by General Electric Fanuc and now part of Emerson Automation. The module is equipped with a DeviceNet terminal. It also has one (1) RS232 9-pin D-sub female connector that is used as the module service port. The IC693DNM200 supports all data transfer rates of the DeviceNet protocol, specifically the 125K, 250K, and 500K transfer rates. Each slave device can transmit up to 255 bytes of input data and 255 bytes of output data from the master, and up to 3972 bytes of input data and 3972 bytes of output data to the master module. Additionally, the module can communicate with up to 63 slave devices, each of which can be assigned up to two (2) I/O stations, for a total of 126 I/O connections. The data connections supported and configurable by the module are Polling, Strobe, Cyclic or COS. This DeviceNet Master module also supports Explicit Messaging, Unconnected Message Manager (UCMM) and one (1) Proxy connection per slave unit. Additionally, the module can operate in dual mode as both a Master and a Slave simultaneously.

The fault behavior in the event of a communication interruption can be configured to provide an acceptable system reaction in the event of the above errors. The module also has upgradeable firmware, allowing module updates and bug fixes to be downloaded through the RS232 service port.

The IC693DNM200 is a GE (General Electric) PLC (Programmable Logic Controller) module for use in GE's Series 90-30 series PLC systems.

The IC693DNM200 module is a Devicenet Master module with the following features and functions:

Device network communication: The IC693DNM200 module supports the Devicenet communication protocol for communicating with other Devicenet devices. Devicenet is a commonly used industrial network protocol for connecting and controlling various devices such as sensors, actuators, drives, etc.
Master function: The IC693DNM200 module acts as the master of the Devicenet network, responsible for controlling and monitoring the slave devices connected to the network. It can exchange data, monitor status, and send control commands with other slave devices over the Devicenet network.
High-speed communication: The module supports high-speed communication, which can achieve fast data transmission and response time to meet the needs of real-time control systems.
Configuration and diagnostics: The IC693DNM200 module provides configuration tools and diagnostic functions that can be used to set network parameters, configure slave devices, and monitor network status. These functions help simplify the system configuration and troubleshooting process.
Module scalability: The IC693DNM200 module can be used with other GE Series 90-30 PLC modules to achieve larger and more complex control systems. It can be combined with other input and output modules, CPU modules, communication modules, etc. to meet the needs of specific applications.
IC693DNM200 is a PLC (Programmable Logic Controller) module from GE (General Electric) for GE's Series 90-30 series PLC system.

The IC693DNM200 module is a Devicenet Master module with the following features and functions:

Device network communication: The IC693DNM200 module supports the Devicenet communication protocol for communication with other Devicenet devices. Devicenet is a commonly used industrial network protocol for connecting and controlling various devices such as sensors, actuators, drives, etc.
Master function: The IC693DNM200 module acts as the master of the Devicenet network, responsible for controlling and monitoring the slave devices connected to the network. It can exchange data, monitor status, and send control commands with other slave devices through the Devicenet network.
High-speed communication: The module supports high-speed communication, which can achieve fast data transmission and response time to meet the needs of real-time control systems.
Configuration and diagnostics: The IC693DNM200 module provides configuration tools and diagnostic functions that can be used to set network parameters, configure slave devices, and monitor network status. These functions help simplify the system configuration and troubleshooting process.
Module scalability: The IC693DNM200 module can be used with other GE Series 90-30 PLC modules to achieve larger and more complex control systems. It can be combined with other input and output modules, CPU modules, communication modules, etc. to meet the needs of specific applications.

IC693DNM200 is a PLC (Programmable Logic Controller) module from GE (General Electric) for GE's Series 90-30 series PLC system.
The IC693DNM200 module is a Devicenet Master module with the following features and functions:

Device network communication: The IC693DNM200 module supports the Devicenet communication protocol for communicating with other Devicenet devices. Devicenet is a commonly used industrial network protocol for connecting and controlling various devices such as sensors, actuators, drives, etc.
Master function: The IC693DNM200 module acts as the master of the Devicenet network, responsible for controlling and monitoring the slave devices connected to the network. It can exchange data, monitor status, and send control commands with other slave devices over the Devicenet network.
High-speed communication: The module supports high-speed communication, which can achieve fast data transmission and response time to meet the needs of real-time control systems.
Configuration and diagnostics: The IC693DNM200 module provides configuration tools and diagnostic functions that can be used to set network parameters, configure slave devices, and monitor network status. These functions help simplify the system configuration and troubleshooting process.
Module scalability: The IC693DNM200 module can be used with other GE series 90-30 PLC modules to achieve larger and more complex control systems. It can be combined with other input and output modules, CPU modules, communication modules, etc. to meet the needs of specific applications.
Network communication:

Supports Devicenet communication protocol, allowing communication with other Devicenet devices.

As the master of the Devicenet network, it is responsible for controlling and monitoring the slave devices connected to the network.

Supports high-speed communication, fast data transmission and response speed, which can meet the needs of real-time control systems.

Connection and control:

It is usually used to connect and control variable frequency drive (VFD, variable frequency drive) modules and other devices such as sensors and actuators.

Allows the PLC system to exchange data and transmit control commands with other devices through the DeviceNet network.

Configuration and diagnosis:

Provides configuration tools and diagnostic functions for setting network parameters, configuring slave devices, and monitoring network status.

Simplifies the system configuration and troubleshooting process.

Module Scalability:

Can be used with other GE 90-30 Series PLC modules to achieve larger and more complex control systems.

Can be combined with other input/output modules, CPU modules, communication modules, etc. to meet the needs of specific applications.

Technical Specifications

Module Location: Suitable for any slot of the 90-30 Series, except slots 0 and 1.

Communication Speed: Supports standard DeviceNet transmission rates such as 125K, 250K, and 500K baud.

Data Capacity Each slave device can transmit up to 255 bytes of input data and 255 bytes of output data to this master module, as well as 3972 bytes of input information and 3972 bytes of output information.

I/O Connections: A total of 126 I/O connections can be established, as it can communicate with up to 63 slave devices, and each slave device can be assigned up to two I/O stations.

Port Configuration Equipped with one DeviceNet terminal and one RS232 9-pin D-type female port (used as module service port).

Rated voltage: 12 to 24 VDC (positive logic).

Dimensions: Compact design

Operating temperature: -40°C to +70°C

Power consumption: ≤15W

Communication protocol: DeviceNet

Number of inputs/outputs: 4x DI/2x DO

Dimensions: 96mm x 110mm x 34mm

Weight: Approx. 145g

Experience unparalleled connectivity and control with the GE FANUC IC693DNM200 DeviceNet Master Module. Designed for industrial automation applications, the module ensures efficient data exchange and command execution on the DeviceNet network.

Designed for durability and reliability, it can operate in extreme temperature conditions (-40°C to +70°C), making it ideal for harsh industrial environments. The built-in power consumption of 6W ensures efficient operation without compromising performance.

With its compact size (84mm x 114mm x 54mm), the IC693DNM200 fits seamlessly into any automation setup, improving space utilization without compromising functionality.

With 16 inputs and 16 outputs, the module supports a wide range of applications, enabling precise control of industrial processes. The DB9 connector allows for easy connection to other devices, facilitating quick installation and maintenance.

The DeviceNet protocol boasts a 100 kbps communication speed, ensuring high-speed data transfer, reducing latency and improving overall system responsiveness. This is particularly beneficial in time-sensitive industrial operations where quick decision making is critical.

I think you'll find our product offers great value for money！

It's my pleasure to introduce our latest product, which will be a great addition to your current offerings！

We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly！

We believe this product can help to expand your market share. We look forward to the opportunity to work with you！

We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day！

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

.Technical Team Service Hotline：wujinghan102@gmail.com     +86 13376990653

                                                         csyili980622@gmail.com        +86 13306931261