GE VMIC VMIPCI-5565-110000 Control Pulse Module

GE VMIPCI-5565-110000 is a control pulse module with multiple pulse input/output channels for receiving and sending pulse signals. The module has high-speed counting capabilities and supports multiple counting modes, such as rising edge counting, falling edge counting, pulse width counting, etc., and can set preset counter values. In addition, it supports multiple input signal types, has timer/counter function, provides communication interface, supports programming and configuration, and has status indication function

Category:
G GE
Share

Related products

 
 

Product Introduction

GE VMIPCI-5565-110000 Reflective Memory
The VME-5565 Reflective Memory node card provides a high-speed, low-latency, deterministic interface that allows up to 256 independent systems (nodes) to share data at a rate of 170 Mbytes per second. Each Reflective Memory board can be configured with 64 Mbyte or 128 Mbyte of onboard SDRAM. The local SDRAM can quickly read stored data. Write data is stored in the local SDRAM and broadcast to other Reflective Memory nodes through a high-speed fiber optic data path. Transmit and receive FIFOs buffer data during peak data rates to optimize processor and bus performance and maintain high data throughput.

Main Features
Pulse Input: The module supports multiple pulse input channels and can receive pulse signals from external devices.
High-speed counting: The module has high-speed counting capabilities and can accurately count and measure the frequency and number of input pulses.
Versatile Interface: The module provides a variety of interface options to facilitate connection and communication with different types of devices and systems.
Accuracy and stability: The accuracy and stability of pulse counting are the key features of this module, which is suitable for applications that require accurate measurement.
Real-time data acquisition: The module is able to collect data of input pulse signals in real time and pass it to the upper control system or data processing unit.
Flexible configuration: The module has configuration options, allowing users to customize and adjust it according to specific application needs.
Programmable logic: Some pulse modules support programmable logic, allowing users to implement specific counting and control logic.
Industrial-grade durability: Considering the usual industrial environment, the module has a durable design to adapt to harsh working conditions.
Fault detection and alarm: The module has fault detection function and can report any abnormal situation in time.
Application field
GE VMIVME-5565-110000 control pulse module is widely used in the field of industrial automation and control systems, including but not limited to manufacturing, power, chemical, oil and gas, medical equipment and other fields. It can be used with various sensors and actuators to achieve precise control and monitoring of industrial equipment.

Pulse Input/Output: GE VMIPCI-5565-110000 Control Pulse Modules usually have multiple pulse input channels and/or pulse output channels for receiving and sending pulse signals.
High-speed counting: GE VMIPCI-5565-110000 Control Pulse Modules usually have high-speed counting capabilities, capable of processing fast-changing pulse signals in real time.
Counting Mode: GE VMIPCI-5565-110000 Control Pulse Modules may support different counting modes, such as rising edge counting, falling edge counting, pulse width counting, etc.
Preset Counter Value: Some modules may allow users to set pre-designed count values ​​to trigger actions when a specific count value is reached.
Multiple Input Signal Support: GE VMIPCI-5565-110000 Control Pulse Modules usually support multiple different types of pulse input signals, such as digital signals or analog signals.
Timer/Timer Function: GE VMIPCI-5565-110000 Control Pulse Modules may have timer or timer functions for generating specific pulse signals or timing tasks.
Communication Interface: GE VMIPCI-5565-110000 Control Pulse Modules usually have communication interfaces to allow data exchange and communication with other devices or systems.
Programming and Configuration: These modules may have programming capabilities to enable users to customize and configure them as needed.
Status Indicator: GE VMIPCI-5565-110000 Control Pulse Modules usually have status indicators or displays to show the module's operating status and diagnostic information.

Parameters

Network transfer rates from 43 Mbyte/s (4-byte packets) to 170 Mbyte/s (64-byte packets)

Dynamic packet size, 4 to 64 bytes of data

Up to 256 nodes

Connections up to 300 meters with multimode fiber and up to 10 kilometers with single-mode fiber

Data written to the memory of one node is also written to the memory of all nodes on the network

High-speed, easy-to-use fiber-optic network (2.12 Gbaud serial rate)

VME transfer rate 40 Mbytes

64 Mbyte or 128 Mbyte SDRAM reflective memory

Technical features

High-speed data transfer:

Serial connection speeds up to 2.12 Gbaud.

Transfer rates vary depending on packet size, up to 47.1 MB/s for 4-byte packets and up to 174 MB/s for 64-byte packets.

Large memory:

The onboard SRAM capacity is optional 128MB or 256MB, providing ample storage space.

Dynamic packet size:

Supports dynamic packet size from 4 to 64 bytes to meet the needs of different application scenarios.

Interrupt transmission:

Supports any node to generate interrupts, which can be used to synchronize system processes or track data.

No processor overhead:

The processor does not participate in network operation, reducing system load.

Easy to integrate and use:

Compliant with PCI Revision 2.2 standard, easy to integrate with various computer systems.

Provides rich hardware interfaces and drivers to simplify the development and deployment process.

Application scenarios

VMIPCI-5565-110000 reflective memory is widely used in occasions that require high-speed, real-time data sharing, such as

Industrial process control:

In industrial automation systems, sensor data and control instructions are shared in real time to improve productivity.

Simulation and training:

In simulation systems, simulation data and status information are shared in real time for training and testing.

Data Streaming and Acquisition:

In data acquisition systems, collected data is shared in real time for analysis and processing.

Commercial, Telecom, and Military Applications:

In these areas where data needs to be transmitted and shared at high speeds with certainty, reflective memory can provide a high-performance solution.

Advantages

High Performance:

High-speed data transmission and low latency make reflective memory an ideal solution for demanding applications.

High Reliability:

Redundant transmission modes and error detection capabilities increase system reliability and stability. \

Easy to Maintain:

No software management overhead and operating system dependency, reducing maintenance costs.

Scalability:

Supports up to 256 nodes and can be expanded as needed.

 

I think you'll find our product offers great value for money!

It's my pleasure to introduce our latest product, which will be a great addition to your current offerings!

We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly!

We believe this product can help to expand your market share. We look forward to the opportunity to work with you!

 

We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day!

 

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

 

.Technical Team Service Hotline:wujinghan102@gmail.com     +86 13376990653

                                                         csyili980622@gmail.com        +86 13306931261

 

  • 返回顶部