Bently Nevada 330130-085-01-05 - EXTENSION CABLE
BENTLY EXTENSION CABLE
Origin: United States
Brand: Bently Nevada
330130-085-0105 is a 3300 XL Standard Extension Cable manufactured by Bently Nevada and used in proximity transducer system. Proximity Sensors come from the factory with a standard calibration to AISI 4140 steel. It is possible to calibrate on-demand to additional target materials. You might consult Bently Nevada Applications. Take note of the factors to take into account when using eddy current proximity probes for Overspeed protection applications when assessing this transducer system for tachometer or Overspeed measurements. Physically and technologically, the non-XL 3300 5 and 8 mm components can be swapped out for the 3300 XL 8 mm components. Even if the packaging of the 3300 XL Proximitor Sensor differs from that of its predecessor, it is still designed to fit in the same 4-hole mounting pattern when used with the same mounting base's 4-hole mounting pattern and will adhere to the same mounting space requirements.
Related products
Product Introduction
System performance is restricted to the non-XL 3300 5 and 8 mm Transducer System standards when XL and non-XL 3300
series 5 and 8 mm system components are combined.
The 3300-series 5 mm probe (see to Specifications and Ordering Information p/n 141605-01) has a smaller physical
footprint than an 8 mm probe, but it cannot be used with reduced side view clearances or tip-to-tip spacing.
When the use of an 8 mm probe is prohibited by physical—not electrical—constraints, this method is used. Use the 3300
NSvTM Proximity Transducer System when narrow side view probes are needed.
A thicker encapsulation of the probe coil in the molded PPS plastic probe tip is offered by 8 mm probes. As a result, the
probe becomes more robust.
The probe body's increased diameter also offers a stronger, more durable casing. For the best robustness against physical
abuse, Bently Nevada advises using 8 mm probes wherever it is practical.
Many products have not been listed yet. Please contact us for more products If there is any inconsistency between the product model
and the displayedpicture, the model shall prevail. Please contact us for specific product pictures, and we will arrange for photos to be
taken in the warehouse for confirmation
Technical Team Service Hotline：0591-85299001
