Product Introduction

6SE7041-3TL84-1JC1 Trigger board 2AX address Iaddress280-283 Qaddress268-271 Common components of Siemens S7-300 series mainly include power module (1), CPU module (1), switch module (2), switch output module (2), analog input module (2), analog output module. The following is the description: SFC1 "READ_CLK" reads the CPU clock. If you confirm that the above reasons can be eliminated, then your CP342-5 may be damaged, please replace it; 85: What is the difference between the three working modes of CP342-5? In NoDP mode: You can use the CP342-5 communication port for S7 programming or PROFIBUS FDL connection to connect to the human-machine interface; In DPMaster mode: In addition to being a PROFIBUS master in the network, CP342-5 can also be used for S7 programming, FDL connection and connection to the human-machine interface.

Siemens inverters are produced, developed and sold by Siemens in Germany. They are mainly used to control and adjust the speed of three-phase AC asynchronous motors. They have rich functions and stability. High-performance vector control technology, low-speed high-torque output, good dynamic characteristics, strong overload capacity, innovative BiCo (internal functional interconnection) function and unparalleled flexibility occupy an important position in the inverter market.

G120 inverter is an integrated inverter, which combines the rectifier and inverter units together, so you don't have to make separate selections. However, the functions of G120 are very limited. It can only have vector axes to achieve vector control. And the rectifier part is non-feedback type.

G120 debugging instructions: namespace prefix = "o" ns = "urn:schemas-microsoft-com:office:office" />

1. Motor parameter settings.

Enter the P ARAMS access interface and select the FILTER/EXPERT option. Press the OK key and select the code.

P0003 User access level is set to 3 by default.

P 0010 Quick debugging selection is set to 1

Exit and enter SETUP to set motor parameters (PARAMS is all parameter settings, SETUP is quick debugging. Motor parameters can also be set in PARAMA)

At the beginning of quick debugging, there will be parameter initialization. You need to select YES. No need to select NO

P0015 Macro file drive device selection parameter is set to 7 (network control)

P0304 Motor voltage 380~400 Motor nameplate

P0305 Motor current Motor nameplate

P0307 Motor power Motor nameplate

P0310 Motor frequency Motor nameplate

P0311 Motor speed Motor nameplate

P0314 Motor rating Motor nameplate

6SL3210-1KE23-2AF1

6SL3210-1KE23-2UC1

6SL3210-1KE23-2AC1

6SL3210-1KE23-8UB1

6SL3210-1KE23-8AB1

6SL3210-1KE23-8UP1

6SL3210-1KE23-8AP1

6SL3210-1KE23-8UF1

6SL3210-1KE23-8AF1

6SL3210-1KE23 -8UC1

6SL3210-1KE23-8AC1

6SL3203-0CE13-2AA0

6SL3203-0CE21-0AA0

6SL3203-0CE21-8AA0

6SL3203-0CE23-8AA0

6SL3201-0BE14-3AA0

6SL3201-0BE21-0AA0

6SE7041-3TL84-1JC1 Trigger Board Note that the permitted long-term* value for the input voltage is 12 V and the short-term (max. 1 sec) value is 30 V. The application module in each rack starts at slot 4, so the addressing also starts at slot 4. Evaluate the * event before the STOP and find the cause of the STOP. To do this, you must install the GSD file in the hardware catalog (via the menu sequence Tools>"Install new GSD file").

SINAMICS G120 is a modular inverter launched by Siemens that can be composed of several unit modules. The most important units are: CU (control unit) and PM (power module).

G120 is a series of Siemens inverters.

PM240 refers to a category of power modules connected to G120. Depending on the power, there are many specific models of PM240 modules to choose from. For example, 3*AC 380V, 0.75KW The model of P240 power selection is: 6SL3224-0BE13-7UA0

G120 has some major improvements compared to MM4 series: 1. The control unit (CU) and power module (PM) are separated. This means that the same control unit can adapt to power modules of different capacities. Therefore, you can put it in the office to do some debugging (setting BiCo), and it does not necessarily have to be debugged on site. 2. The CU unit can be powered by 24V alone, including the BOP plugged in. 3. The redesigned heat dissipation duct of the power module (PM) avoids the easy accumulation of dust on the MM4 series component board. Of course, it brings about improved reliability and actually reduces the installation environment. 4. Unlike the MM4 series, which uses modular Instead of "superposition" of blocks, CU, IO and communication functions are integrated together. This further improves reliability and reduces failure rate. Of course, it also brings that at the beginning of design, you need to think about the communication solution. Use or not use the network? What form of network to use must be determined. Because it is integrated with CU. 5. Different safety levels S1-S3 are added in accordance with its CU, and external relays or contactors are required. 6. Others only provide more IO ports than MM4. 7. G120 can only be debugged with Starter and does not support DriverMonitor. If you want to use Ethernet, you must order a control unit that supports Profinet.

P1080 *Minimum speed

P1082 *Speed

P1120 Rising time: about 15 seconds for pumps and about 50 seconds for fans

P1121 Falling time: about 15 seconds for pumps and about 50 seconds for fans

P1900 Motor data detection and rotating motor detection: set to 2 or 0 to cancel the function

If it is a quick setting, P 3900 must be set to 1 to end the quick setting. Note: If P0010=1, you must enter the quick setting and complete the quick setting process and press YES. End the quick setting.

6SL3244-0BB12-1PA1 6SL3244-0BB12-1FA0 6SL3244-0BB13-1BA1 6SL3244-0BB13-1PA1 6SL3244-0BB13-1FA0 6SL3246-0BA22-1BA0 6SL3246-0BA22-1PA0 6SL3246-0BA22-1FA0 6SL3246-0BA22-1CA0 6SL3210-1PE11-8UL0 6SL3210-1PE12-3UL0 6SL3210-1PE13-2UL0 6SL3210-1PE 14-3UL0

6SL3210-1PE16-1UL0

6SL3210-1PE18-0UL0

6SL3210-1PE11-8AL0

6SL3210-1PE12-3AL0

6SL3210-1PE14-3AL0

6SL3210-1PE13-2AL0

6SE7041-3TL84-1JC1 Trigger Board Model Introduction

6SE7041-3TL84-1JC1 Trigger Board①、Configuration of hardware system: In addition to the necessary selection and setting in the template itself, the hardware system also needs to set the specific functional specifications through software to form a complete system hardware configuration. The configuration information needs to be downloaded to the PLC and further transferred to the corresponding template through the PLC. As shown in the figure, PID0 is set. For specific meanings, please refer to the content in the appendix. 4. Both x and y in FC167 are real numbers. The module rack with installed modules can be used as an expansion rack and connected to the main rack of the system.

6SL3210-1KE21-3UP1

6SL3210-1KE21-3AP1

6SL3210-1KE21-3UF1

6SL3210-1KE21-3AF1

6SL3210-1KE21-3UC1

6SL3210-1KE21-3AC1

6SL3210-1KE21-7UB1

6SL3210-1KE21-7AB1

6SL3210-1KE21-7UP1

6SL3210-1KE21-7AP1

6SL3210-1KE21-7UF1

6SL3210-1KE21-7 AF1

6SL3210-1KE21-7UC1

6SL3210-1KE21-7AC1

6SL3210-1KE22-6UB1

6SL3210-1KE22-6AB1

6SL3210-1KE22-6UP1

6SL3210-1KE22-6AP1

6SL3210-1KE22-6UF1

Siemens inverters were first used in the steel industry. However, at that time, motor speed regulation was still dominated by DC speed regulation, and the application of inverters was still an emerging market. However, with the continuous development of electronic components and the continuous maturity of control theory, variable frequency speed regulation has gradually replaced DC speed regulation and become the mainstream of drive products. Siemens inverters have achieved large-scale development in this huge market due to their powerful effects. Siemens's first development in the inverter market should be said to be the best combination of Siemens and technology. The early Siemens inverters we can encounter in the market mainly include the current source SIMOVERT A and the voltage source SIMOVERT P. These inverters also entered the market together mainly due to the introduction of equipment. There are still a small number of them in use. Later, the main ones sold in large quantities in the market are MICRO MASTER and MIDI MASTER, as well as the most popular series of Siemens inverters, SIMOVERT MASTERDRIVE, which is what we often call the 6SE70 series. It not only provides AC inverters for general occasions, but also provides DC bus solutions for multi-motor drives required in special industries such as papermaking and chemical fiber. Of course, Siemens also launched the ECO inverter, which I personally think is technically unsuccessful but quite popular in the market. The technical failure is mainly due to its too high failure rate, and its popularity in the market is mainly because it has surpassed Fuji inverters to become the market leader. Now Siemens' main models on the market are MM420, MM440.6SE70 series.

Parameter setting:

The inverter has many setting parameters, and each parameter has a certain selection range. It is often encountered that the inverter cannot work normally due to improper individual parameter settings.

Control mode: speed control, torque control, PID control or other methods. After adopting the control method, static or dynamic identification is generally required according to the control accuracy.

6SE7041-3TL84-1JC1 trigger board V. Program development R011: switch output status, the 0th bit represents the 46th terminal serious fault, and the 7th bit represents 109/110 EM241Modem (modem) module supports remote maintenance or remote diagnosis, communication between PLCs, communication between PLCs and PCs, sending short messages to mobile phones, etc. The EM241 parameterization wizard is integrated in Micro/WINV3.2. 2.2.5 Grounding 1. Lap Low-resistance grounding connection can reduce the risk of electric shock in the event of a short circuit or system failure.

I think you'll find our product offers great value for money！

It's my pleasure to introduce our latest product, which will be a great addition to your current offerings！

We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly！

We believe this product can help to expand your market share. We look forward to the opportunity to work with you！

We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day！

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

.Technical Team Service Hotline：wujinghan102@gmail.com     +86 13376990653

                                                         csyili980622@gmail.com        +86 13306931261