EPRO A6740
EPRO A6740
Origin: Germany
Brand: EPRO
Signal Input 1: There are two independent sensor signal inputs, namely SENS 1H (z8)/SENS 1L (z10) and SENS 2H (d8)/SENS 2L (d10). Can be matched with eddy current sensors such as PR6423+CON021, or Hall effect sensors such as PR9376. The input voltage range is 0~-27.3V dc. The module provides two channels of -26.75V DC power supply for the sensor, corresponding to SENS 1+(z6)/ENS 1- (b6) and SENS 2+(d6)/ENS 2- (b8). The sensor signal can be measured at the SMB interface on the front panel of the module, and the measured signal is the input signal multiplied by 0.15.
Signal output 1:
TTL pulse output: There are two TTL pulse outputs, one for each channel, with a voltage of 0~+5V. The pulse width and frequency are consistent with the sensor signal, and can be output at the rear terminal (z14/z16) or measured at the "Pulse" interface on the front panel SMB interface.
Key phase signal output: There are two key phase signal outputs, one for each channel, with an output voltage of 24V.
We have a large amount of inventory in our warehouse. Welcome to inquire online about any model and quantity, with discounted prices.
24-hour service for you
Related products
Product Introduction
EPRO relay module A67405
Working mode: Power on, IN input high level, relay engaged, indicator light on, low voltage (5V, 9V, 12V, 24V) control of high voltage power supply can be achieved through the relay module.
Functional Features
Relay type: Adopting the original Songle SRD series relay commonly used in small household appliances, which can be switched on and off 100000 times.
Control signal: The control signal is TTL, with a voltage of 3-24V.
Indicator light: equipped with power indicator light and work indicator light, on and off when turned on or off.
Anti misoperation design: Control pin with pull-down circuit to prevent relay misoperation.
Output load: The output control can be connected to DC (DC30V) or AC (220V mains) loads.
Wiring method: The output adopts high current wiring terminals, which are convenient for wiring and do not require welding.
Other related characteristics
Application areas: Widely used in the turbine monitoring and protection systems MMS 3000 and MMS 6000.
Communication capability: Can easily connect to various devices, with multiple communication interfaces including RS-232/422/485 Ethernet and USB ports
Many products are not yet on the shelves please contact us for more products.
If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will
arrange to take pictures in the warehouse to confirm!
Technical Team Service Hotline
csyili980622@gmail.com +86 13306931261
wujinghan102@gmail.com +8613376990653
