Product Introduction

About the ISGE RS-FS-9001 362A1052P004 Flame Detector | Probe Sensor. The GE RS-FS-9001 Flame Tracker Flame Detector, Model 362A1052P004, is a highly specialized sensor designed to detect flames in harsh, high-temperature environments, such as those found in gas turbines. The detector is part of the Flame Tracker family from GE Reuter-Stokes (now part of Baker Hughes) and is designed to meet the stringent requirements of industrial applications where safety and reliability are critical.

Key Features of the GE RS-FS-9001 362A1052P004 Flame Detector | Probe Sensor:

Certifications: Has North American Class I Division 2 Hazardous Area Certifications, ATEX, and IECEx, ensuring safety and compliance in various international markets.

Performance: Reliable operation with over 500 million hours of operation due to tamper-resistant welded construction.

Power Requirements: Operates on low power with a 4-20 mA current loop and nominal 24 VDC power supply, saving energy.

Detection Capabilities: Utilizes proven UV technology for excellent fuel flexibility and detects a wide dynamic range of light intensities from low to very high.

Easy Installation: Designed for easy installation, fast response time and enhanced safety.

The RS-FS-9001 is a Mark VI Series ISBB Bypass Module developed by General Electric. General Electric developed the Mark VI system to manage steam and gas turbines. The Mark VI operates this operation through central management, using a central control module with a 13 or 21 slot card rack that connects to a terminal board that brings in data from around the system, while the Mark VIe follows the central management direction through distributed management (DCS—Distributed Control System) through control nodes placed throughout the system. Both systems are designed to be compatible with integration software such as the CIMPLICITY Graphical Platform.

Features

The component is housed in a rectangular enclosure with four inputs or outputs. Two of these are located at the bottom of the unit and two are located at the top of the unit.

Two female jacks are placed side by side on the top of the unit. One (P2) is labeled "Transmit Out". The other (P3) says "Receive". An additional female jack (P1) labeled "Full Duplex" and a two-position terminal block (TB1) labeled 10 mA Max 24 V DC are located on the bottom of the unit. Openings on the top and bottom of the unit allow for airflow and heat dissipation.

The module has two LED status indicators on the front. Receiver Active and Unbypassed are labeled. The rear design of the unit allows the user to choose the mounting method. The side of the unit has labels for each module connector (top and bottom) and a diagram to help troubleshoot front panel LED issues.

Maintenance and calibration of the IS210BPPCH1AD are critical to ensure its long-term stable operation and accurate measurements. The following are general steps and precautions for IS210BPPCH1AD maintenance and calibration:

Regular Cleaning: Clean the surface and connection parts of the IS210BPPCH1AD regularly to remove dust, dirt and other impurities that may affect its performance. Use appropriate cleaning agents and tools, and ensure that no parts are damaged during the cleaning process.

Check the connections: Check the electrical connections of the IS210BPPCH1AD regularly to ensure that they are all tight and free of corrosion or damage. If any connection problems are found, the damaged parts should be repaired or replaced in a timely manner.

Calibrate the sensor: For the IS210BPPCH1AD as a pressure sensor, regular calibration is key to ensure measurement accuracy. Use calibration equipment and a standard pressure source and follow the manufacturer's guidelines for calibration operations. During the calibration process, all necessary data should be recorded and the calibration results should be verified after completion.

Software Updates: If the IS210BPPCH1AD contains updateable software or firmware, regular inspection and updates of these software can ensure the performance and safety of the device. Follow the manufacturer's instructions and ensure that the correct steps and precautions are followed during the update process.

Safety Precautions: When performing maintenance and calibration of the IS210BPPCH1AD, be sure to comply with relevant safety regulations and operating procedures. Ensure that the device is not damaged during maintenance or calibration, and prevent any situation that may cause personal injury or equipment damage.

RS-FS-9001 362A1052P004 is an imported flame sensor detector produced by GE or its related product lines, mainly used in power plants and other scenes where flame detection is required. This product has high stability and reliability and may have good compatibility with GE's DCS system or other industrial automation equipment.

Product Details: RS-FS-9001 362A1052P004 GE Flame Sensor Imported Detector Detection function: As a flame sensor, RS-FS-9001 362A1052P004 can accurately detect the presence or absence of flames, ensuring the safe operation of the equipment. Stability and reliability: GE brand products typically have high stability and reliability, and can operate stably for a long time in harsh industrial environments. Compatibility: This product may have good compatibility with GE’s DCS system or other industrial automation equipment, making it easy to integrate and upgrade the system. Product details and parameters: RS-FS-9001 362A1052P004 GE flame sensor imported detector Model: RS-FS-9001 362A1052P004 Type: Flame Sensor Import Detector Brand: GE (General Electric) Scope of application: Mainly used in scenarios such as power plants that require flame detection RS-FS-9001 362A1052P004 GE Application Fields: RS-FS-9001 362A1052P004 is an imported flame sensor detector produced by GE or its related product lines, mainly used in scenarios such as power plants that require flame detection. This product has high stability and reliability, and may have good compatibility with GE’s DCS system or other industrial automation equipment.

I think you'll find our product offers great value for money！

It's my pleasure to introduce our latest product, which will be a great addition to your current offerings！

We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly！

We believe this product can help to expand your market share. We look forward to the opportunity to work with you！

We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day！

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

.Technical Team Service Hotline：wujinghan102@gmail.com     +86 13376990653

                                                         csyili980622@gmail.com        +86 13306931261