GE touch panel IC755CSW07CDA QuickPanel+ Operator terminal
IC755CSW07CDA is Emerson Automation's QuickPanel+ operator terminal, also commonly referred to as a human-machine interface (HMI) or operator interface terminal (OIT) by most people in the industry. This device is primarily used to provide real-time monitoring and control capabilities of a connected machine or process through an embedded 7-inch widescreen display with a resolution of 800x480 pixels and a multi-touch operator input interface.
Product Introduction
Brand: General Electric
Model: IC755CSW07CDA
Product Name: Touch Screen | QuickPanel+ Operator Terminal
The IC755CSW07CDA is the QuickPanel+ operator terminal from Emerson Automation. This device is commonly referred to as a human-machine interface (HMI) or operator interface terminal (OIT) by most people in the industry, as this electronic device is mainly used to provide real-time monitoring and control capabilities of the connected machine or process through an embedded 7-inch widescreen display with a resolution of 800 x 480 pixels and a multi-touch operator input interface. In addition, the terminal is also capable of acting as a controller, machine gateway, and data historian.
The IC755CSW07CDA is an HMI device that supports panel mounting or VESA 75 mounting. It requires an input supply voltage of +24 VDC±20% terminated to the provided 3-pin Phoenix connector. The maximum power consumption of this device is also 15 watts. It uses natural convection to cool the device and must be installed in an application area with a temperature range of 0-55 degrees Celsius and a relative humidity of 85%.
The IC755CSW07CDA is pre-installed with an instance of the Windows Compact Embedded 7 operating system (OS). The OS provides a user-friendly configuration environment and offers connectivity and terminal management features and tools. The HMI is powered by an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor that integrates memory consisting of 512 MB DDR2 SDRAM, 256 MB SLC NAND Flash, and 512 KB SRAM.
The HMI is equipped with one (1) Ethernet I/P communication port and one (1) RS232 communication interface. It also has three (3) USB ports and one (1) SD SDHC removable card slot for memory expansion.
The IC755CSW07CDA terminal is a 7-inch Quickpanel terminal manufactured by GE Fanuc. It is a Quickpanel series terminal that comes with a color TFT wide screen that can display clear data and information. The panel supports multi-touch and is easy to use. It has a resolution of WVGA 800 x 480 pixels. It is powered by a 24 volt DC power supply. The terminal uses a GE monogram bezel. The terminal is designed in a NEMA 4X enclosure. It is equipped with 512 MB DDR2 SDRAM and 256 MB NAND flash memory for storage. The IC755CSW07CDA terminal has a 10/100 Base T Ethernet port and an RS-232 port for communication. There are also two USB ports in the display terminal. The temperature should be maintained between 0 to 55 degrees Celsius for optimal operation. The operator interface terminal is certified to UL, CE and EN standards.
The GE Fanuc IC755CSW07CDA terminal carries an ARM A8 cortex processor with a speed of 1 GHz. It is capable of handling 2D and 3D graphics easily. The terminal is equipped with a neon SIMD media accelerator that helps in handling graphics-intensive processes. There is another vector floating-point coprocessor to handle logical operations. The terminal uses the Windows 7 operating system to interact with the operator. The maximum rated power consumption of the IC755CSW07CDA terminal is 15 watts. The natural convection method is used to maintain the temperature of the terminal. When not in use, it can be stored in a temperature range of -10 to 60 degrees Celsius
IC755CSW07CDA Emerson EMERSON (formerly GE) 7-inch color touch screen human-machine interface HMI, QuickPanel, easy product installation, detailed usage tutorial, complete product packaging, original factory shipment, rich inventory, *. Long warranty period, welcome customers to consult and communicate.
The fast track line uses a set of GE's PACSystems high-reliability redundant controller as the main controller, and a pair of redundant Genius fieldbuses are used at both ends of the station A/B to connect the field RI/O box. When there is a problem with the field bus at one end, it will not affect the normal operation of the equipment at the other end. The IBP disk is also connected to the redundant main controller through the A-end bus as a remote I/O. The field I/O in the box uses VersaMax products. The communication with FAS system is realized through the integrated serial port of CPU module.
PACSystems has the characteristics of high computing speed, large memory capacity, high-speed parallel backplane bus, open architecture, etc., which meet the requirements of BAS system. Redundant PACSystems adopts separate rack structure to avoid single point failure of any key components and ensure that the system can operate continuously and safely for a long time. IC755CSW07CDA's 2.12G optical fiber high-speed synchronous network and perfect synchronization and switching mechanism ensure the disturbance-free switching of the controller within a scanning cycle and ensure the normal operation of the system.
VersaMax remote I/O station has the module hot-swap capability to realize real-time control of switch quantity, analog quantity and other signals. At the same time, it connects UPS, chiller, inverter, IMCC cabinet and other equipment through Modbus bus module to collect relevant data and implement control. For the use of non-standard protocols, it can be connected to BAS system by gateway conversion.
Genius bus is a frequency modulation field bus with long transmission distance and strong anti-*. In this project, the section pump room control box is converted to optical fiber and connected to the Genius bus through an optical fiber conversion module. If the distance between the section pump rooms is within 2 kilometers, it is also possible to consider directly using shielded twisted pair cables for connection.
The station-level BAS monitoring system software uses GE's Proficy family software products, including Machine Edition (ME) and Plant Edition (PE) software.
ME is a highly integrated programming configuration software package. IC755CSW07CDA users can use it to complete the system configuration, program development, network configuration, operation monitoring of redundant PACSystems, and configuration monitoring of remote I/O station VersaMax products.
PE is HMI/SCADA software with the characteristics of convenient and flexible development, stable operation, and rich connection drivers. In this project, each underground station is equipped with a set of 35,000-point PE as a station monitoring platform.
GE Touch Screen IC755CSW07CDA QuickPanel+ Operator Terminal The IC755CSW07CDA is a QuickPanel+ operator terminal. It is part of the Visualization product catalog produced by Emerson Automation, formerly GE Intelligent Platforms (GE IP).
GE Touch Screen IC755CSW07CDA
It can be used for Human Machine Interface (HMI) and has an embedded display with a size of 7-inch widescreen TFT LCD screen with a resolution of 800 x 480 pixels. MX535 1 GHz ARM Cortex A8 processor. The integrated memory available for this HMI includes 512 MB DDR2 SDRAM; 256 MB SLC NAND and 512 KB SRAM. For communications, this device has one (1) gate and one (1) RS232 communications port. This terminal operates on an input supply voltage of 24 VDC.
GE F650BABF2G0LOSHE Feeder Protection Device This article introduces the PLC and installation software of F650BABF2G0LOSHE in a small automation instrumentation system, taking the FX-2N series automation controller as an example
GE F650BABF2G0LOSHE Feeder Protection Device
DS200TCTGG1AFF
To replace the relay, the GE Simplex trip board DS200TCTGG1AFF must be removed from the drive. Communicate with an engineer or installer who is familiar with the drive installation and the power supply connected to the drive. Disconnect the fuse or other power supply as needed. Before continuing, use a test device to test the current inside the drive. Disconnect the cables from the circuit board and the poor cable location diagram so that the cables can be connected to the correct connector when the circuit board is reinstalled.
I think you'll find our product offers great value for money!
It's my pleasure to introduce our latest product, which will be a great addition to your current offerings!
We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly!
We believe this product can help to expand your market share. We look forward to the opportunity to work with you!
We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day!
· Many products are not yet on the shelves please contact us for more products.
· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!
.Technical Team Service Hotline:wujinghan102@gmail.com +86 13376990653
csyili980622@gmail.com +86 13306931261