BENTLY Nevada 330180-50-05 - PROXIMITOR SENSOR

BENTLY PROXIMITOR SENSOR

330180-50-05 is a 5/8 mm Proximitor Sensor manufactured by Bently Nevada. It is a part of the 3300 Series used in the proximity transducer system. All 3300 and 3300 XL probes in the 5 and 8 mm sizes are compatible with the Bently 3300 XL 5/8mm Proximitor Sensor. There are many upgrades over earlier models in the 3300 XL Proximitor Sensor. Because of its physical packaging, you can use it in DINrail setups with high density. The sensor can also be mounted using a conventional panel mount setup, where it has the same 4-hole mounting "footprint" as earlier Proximitor Sensor models. It is not necessary to use separate isolator plates because both mounting bases provide electrical isolation.

Category:
Share

Related products

 
 

Product Introduction

Functional Description

 

The 3300 XL 8mm Proximity Transducer System from Bently Nevada is made up of a 3300 XL 8mm probe, a

3300 XL extension cable, and a 3300 XL Proximitor Sensor. Both static (position) and dynamic (vibration) values

can be measured by the system, which outputs a voltage that is directly proportional to the distance between

the probe tip and the detected conductive surface. Keyphasor reference and speed measurements, as well as

vibration and position measurements on fluid-film bearing machines, are the system's main applications.

 

Product Attributes

 

Perfect for Fluid-Film Bearing Machines, Speed Measurements, and Compression Systems

 

Applications for Extended Temperature Range

 

Complete Unit and Cabling Interchangeability

 

Compatibility with Transducer System Components from Other Non-3300 XL Series

 

330180-50-05 Features

 

The standard API 670 Standard (4th Edition) is fully complied with by the mechanical design, linear range,

accuracy, and temperature stability of the 3300 XL 8 mm 5-meter system. It is not necessary to match or bench

calibrate individual components because all 3300 XL 8 mm proximity transducer systems offer this level of

performance and support full interchangeability of probes, extension cables, and Proximitor sensors.

 

Each component of the 3300 XL 8 mm transducer system is retro compatible and interchangeable with non-XL 5

mm and 8 mm transducer system components from the 3300 series. The 3300 5 mm probe is compatible with

this system and can be used in applications where an 8 mm probe would be too large for the mounting space.

 

Many products have not been listed yet. Please contact us for more products If there is any inconsistency

between the product modeland the displayedpicture, the model shall prevail. Please contact us for specific

product pictures, and we will arrange for photos to be taken in the warehouse for confirmation

Technical Team Service Hotline:0591-85299001

 

  • 返回顶部