Bently Nevada 330180-50-00 Features A 3300 XL 8 mm Proximitor Sensor
BENTLY330180-50-00 - PROXIMITOR SENSOR
Origin: United States
Brand: Bently Nevada
330180-50-00 is a 3300 XL Proximitor Sensor developed by Bently Nevada. It is a part of the Bently Nevada Proximity Transducer System. The system can measure static (position) and dynamic (vibration) readings and outputs a voltage that is directly proportional to the distance between the probe tip and the observed conductive surface. Vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements, are the system's main uses. Quality performance is offered by all 3300 XL 8 mm proximity transducer systems, and full interoperability of probes, extension cables, and Proximitor sensors are supported, so there is no need to match or bench calibrate individual components.
Related products
Product Introduction
330180-50-00 Features
A 3300 XL 8 mm Proximitor Sensor, extension cable, and 8 mm probe between +18 and +27 °C, with a -24 Vdc
power supply, a 10 k load, an AISI 4140 steel target, and a probe gapped at 1.27 mm, are the specifications
unless otherwise stated (50 mils).
System characteristics that only use 3300 XL 8 mm components are referred to as performance characteristics.
Transducer systems calibrated to targets other than our AISI 4140 steel target do not fall under the system
accuracy and interchangeability standards.
Product Attributes
Total Length: 5.0 metre (16.4 feet) system length
Mounting Option: Panel mount
Agency Approval Option: Not required
Digital and Analog Communications
The System Monitor provides digital communication capabilities for connecting to plant process control and
automation equipment, as well as Bently Nevada's online condition monitoring software. For more information
on the System Monitor, see the datasheet.
The 3300 System also provides pre-engineered solutions. Data Analog and Digital Communications The System
Monitor provides digital communication capabilities for connecting to plant process control and automation
equipment, as well as Bently Nevada's online condition monitoring software.
For more information on the System Monitor, see the section on datasheet. The 3300 System also includes data
that has been pre-engineered.
Many products have not been listed yet. Please contact us for more products If there is any inconsistency between the product model and the displayedpicture, the model shall prevail. Please contact us for specific product pictures, and we will arrange for photos to be taken in the warehouse for confirmation
Technical Team Service Hotline:0591-85299001