Product Introduction

Siemens 6SE7041-2WL86-7DF0 inverter has a series of technical standards, especially important ones include:

100% braking power feedback: allows continuous braking, which is impossible with the traditional use of braking resistors.

Low peak current consumption: the current waveform is almost sinusoidal, so only a small transformer rated power is required, and reactive power distortion is reduced.

Reactive power compensation: compensates for the reactive power of motors and other inductive loads on the same power supply, reducing the power consumption of the entire system.

These features allow the inverter to reduce the load on the power system and improve the power factor cosφ while improving energy efficiency.

Control function parameters

Control mode: vector control and motion control.

Input signal normalization: allows users to standardize different input signals to adapt to different control systems.

Ramp function acceleration and deceleration time: used to smooth the motor start and stop process and avoid mechanical shock.

Proportional coefficient (Kp) and integral time (Tn) in the speed regulator: used to adjust the stability and response speed of the system.

Electrical characteristic parameters

Power factor: Improve the power factor cosφ through reactive power compensation.

Harmonic content: The harmonic content is greatly reduced by adopting feeding technology, and the harmonics up to the 11th are significantly lower than the specified values in the relevant standards.

Safety and protection parameters

Overload protection: When the working state exceeds the rated parameters, the inverter will automatically disconnect the power supply to protect the motor and equipment.

Short circuit protection: When a short circuit occurs inside the inverter, the power supply will be automatically disconnected to prevent equipment damage.

Overcurrent protection: When the output current exceeds the rated value, the inverter will automatically disconnect the power supply to protect the motor and equipment.

Overheat protection: When the internal temperature of the inverter is too high, the power supply will be automatically disconnected to prevent equipment damage.

Inverter design features

The design of the Siemens 6SE7041-2WL86-7DF0 inverter focuses on compactness and high energy efficiency:

Feeding technology: The feeding technology is adopted to achieve potential savings, and the harmonic content is greatly reduced compared with conventional two-quadrant inverters.

Harmonic control: harmonics up to 11th order (including 11th order) are significantly lower than the specified values in relevant standards, effectively reducing reactive current components.

This inverter is suitable for a variety of industrial application scenarios. Its main advantages and features include:

Efficient energy saving: load regulation is achieved by accurately controlling the motor speed and output power, thereby achieving energy saving effects.

Stable and reliable: It has high-performance motor control and protection functions, monitors the motor working status in real time, automatically adjusts the output power, and ensures operational stability and reliability.

Easy to maintain: The use of digital control technology facilitates fault diagnosis and maintenance.

I think you'll find our product offers great value for money！

It's my pleasure to introduce our latest product, which will be a great addition to your current offerings！

We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly！

We believe this product can help to expand your market share. We look forward to the opportunity to work with you！

We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day！

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

.Technical Team Service Hotline：wujinghan102@gmail.com     +86 13376990653

                                                         csyili980622@gmail.com        +86 13306931261