Product Introduction

I. Main Functions and Technical Parameters‌

·Signal Processing and Control‌

-Responsible for receiving the raw signal of the thickness gauge sensor (such as ultrasonic/X-ray probe), performing data analysis and thickness calculation through the built-in algorithm, and supporting real-time feedback with the control system‌.

-Built-in high-precision ADC chip, measurement error ≤0.4%, repeatability ±0.4nm, suitable for high-precision measurement scenarios such as metal, plastic and film‌.

·Communication and Scalability‌

-Support industrial protocols such as Modbus and Profibus to achieve data interaction with PLC, host computer or cloud‌.

-Provides multi-channel I/O interface, compatible with external sensor expansion (such as temperature compensation module).

·System stability‌

-Adopt anti-jamming circuit, support a wide temperature range from -20℃ to +50℃, the protection level reaches IP66/IP67, adapt to harsh industrial environments such as dust and humidity‌.

-Built-in self-diagnosis program, real-time monitoring of circuit status and alarm triggering‌.

‌II. Compatible scenarios and model compatibility‌

‌Applicable industries‌:

High-precision thickness inspection of continuous production lines such as paper making, metal processing (such as aluminum plate, steel plate) and film production.

Used with X-ray or laser thickness gauges, support high-speed dynamic scanning with a response time of only 5ms.

‌Compatible Models‌:

Specific models of Measurex thickness gauges (such as ‌6580801300‌, ‌6580800320‌, etc.) must be selected to ensure that the signal interface and power supply parameters are consistent.

‌III. Maintenance and Replacement Guidelines‌
‌Maintenance Points‌:

Regularly clean the PCB surface to remove dust, check whether the solder joints and terminal blocks are loose, and avoid poor contact caused by oxidation.

Use the original calibration block (such as a well-known thickness standard) to regularly check the accuracy of the output signal.

‌Replacement Process‌:

Turn off the power and discharge the residual charge of the device;

Replace the PCB assembly after removing the shell and ensure that the interface is securely connected;
Restart the firmware and perform a self-test to check whether the system is functioning normally.

Thickness gauges are mainly used in aluminum, steel, paper, stainless steel, film and other industries where thickness is measured. They are widely used in industrial production for continuous or selective measurement of the thickness of products (such as steel sheet, steel strip, film, paper, foil and other materials).

- High measurement accuracy

- Suitable for measuring moving objects or fragile materials

- Able to maintain stable and reliable measurement under various conditions

- Easy to operate and understand

- The instrument is suitable for measuring the thickness of various materials, such as steel sheets, steel strips, films, paper, metal foil, etc.

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

Technical Team Service Hotline：csyili980622@gmail.com  Skype：+86 13306931261