Product Introduction

A1A10000428.00M is a frequency converter produced by Siemens Robincon, which is mainly used for equipment control and regulation in industrial automation production lines. The frequency converter has multiple functions and can meet the needs of different industrial application scenarios.

A1A10000428.00M is a driver board widely used in multiple industries, especially in the field of industrial automation. Its main features include wide speed regulation range, high precision, sufficient transmission rigidity and high speed stability, fast response, no overshoot, low speed and high torque, and strong overload capacity. These characteristics enable A1A10000428.00M to provide efficient and reliable performance in a variety of application scenarios.

The role of A1A10000428.00M
A1A10000428.00M is a frequency converter unit board, which plays an important role in the field of industrial automation and power electronics. The following are its main functions:
Control motor speed
The frequency converter unit board achieves precise control of the motor speed by adjusting the frequency and voltage of the input motor. This control method is widely used in equipment such as fans, pumps, compressors, etc. to improve energy efficiency and operating stability.

Improve equipment efficiency
By optimizing the operating status of the motor, A1A10000428.00M can significantly reduce energy consumption, thereby improving the energy utilization efficiency of the entire system. This is of great significance for energy saving and consumption reduction in industrial production.

Enhance system reliability
The inverter unit board usually has a variety of protection functions, such as overload protection, short circuit protection and overheating protection, which can effectively prevent the equipment from being damaged due to abnormal conditions, thereby enhancing the overall reliability of the system.

Improve process flow
In some processes that require precise control, A1A10000428.00M can achieve fine control of process parameters by adjusting the speed and torque of the motor, thereby improving product quality and production efficiency.

Adapt to different load requirements
The inverter unit board can automatically adjust the output according to the change of load, so that it can adapt to different working environments and load requirements, which is particularly important in automated production lines.

As a high-performance inverter unit board, A1A10000428.00M plays a key role in improving equipment performance, saving energy and ensuring system safety.

High precision
The driver board has high-precision control capabilities, which can ensure the precise operation of the equipment under various operating conditions, thereby improving production quality and safety.

Transmission rigidity and speed stability
A1A10000428.00M is designed with sufficient transmission rigidity to ensure the stability of the equipment during operation and reduce the risk of damage caused by vibration.

Fast response and no overshoot
The driver board has the characteristics of fast response, which can quickly track the changes in the command signal and achieve precise control without overshoot, which is especially important for systems that require rapid adjustment.

Low-speed high torque and overload capacity
Even when running at low speed, A1A10000428.00M can provide large torque output, and has strong overload capacity, which can withstand large load changes in a short time.

Functional features
Frequency given channel selection: Users can select the frequency given channel of the inverter through specific function codes to more accurately control the operating frequency of the equipment.

Uplink and downlink frequency adjustment: According to the setting of the function code, the uplink and downlink operating frequencies of the inverter can be adjusted to achieve more precise speed control.

Run command channel selection: Select the appropriate run command channel through the function code to ensure that the inverter can respond correctly to external commands.

External knob potentiometer access: The wiring of the external knob potentiometer can be connected to the corresponding terminal of the inverter for manual parameter adjustment, which increases the flexibility of operation.

Technical parameters
Power range: 400KW-15000KW

Input voltage: 2300VAC-13800VAC

Input power factor: 0.95 at 20%-load

Overload capacity: standard 110% per minute, 150% (optional)

Acceleration time: 0.1-3200 seconds, adjustable (depending on the load)

Deceleration time: 0.1-3200 seconds, adjustable (depending on the load)

Output frequency: 0-50/60HZ, users can choose 330HZ9

Installation and maintenance
A1A10000428.00M The installation and maintenance of the inverter must follow the manufacturer's professional guidance to ensure the normal operation and safe use of the equipment. Regular inspection and maintenance of the inverter can effectively extend its service life and improve production efficiency.

Application fields
Power industry: In power systems, A1A10000428.00M is widely used in the control and regulation of generator sets due to its excellent speed regulation performance and stability.
Petroleum and chemical industry: In the process of oil extraction and chemical production, this driver board can ensure the continuous and stable operation of equipment and improve production efficiency.
Water conservancy industry: In large-scale water conservancy projects, A1A10000428.00M is used to control water pumps and turbines to achieve precise water flow regulation.
Metallurgical industry: In the process of metal production and processing, this driver board can provide stable power output to ensure the continuous operation of the production line.
Technical features
Wide speed regulation range
A1A10000428.00M has a wide speed regulation range, which can meet the needs of different working conditions, from low speed and heavy load to high speed and light load.

A1A10000428.00M inverters are widely used in industrial automation production lines, especially in situations where the speed and frequency of equipment operation need to be precisely controlled. Its powerful functions and flexible operation make it an indispensable tool in the field of industrial automation.

I think you'll find our product offers great value for money！

It's my pleasure to introduce our latest product, which will be a great addition to your current offerings！

We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly！

We believe this product can help to expand your market share. We look forward to the opportunity to work with you！

We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day！

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

.Technical Team Service Hotline：wujinghan102@gmail.com     +86 13376990653

                                                         csyili980622@gmail.com        +86 13306931261