Product Introduction

6SE7037-0EJ84-1JC2 inverter

Keywords: photoelectric converter, profibus, profibus-dp to optical fiber

Product category: fieldbus fieldbus Profibus

Brand: Xunji

Product introduction:
profibus dp ring network optical fiber repeater realizes the conversion between the electrical signal of the profibus dp bus and the optical fiber signal. This device has two sets of fiber optic interfaces that can form a fiber optic self-healing ring network, and has two sets of DP bus interfaces. In the dual-network redundant system, only one device is needed.

Overview:
This series of products is a Siemens Profibus photoelectric converter, supporting PROFIBUS DP bus, independent dual-bus electrical interface and 2 fiber optic interfaces, providing redundant dual-bus structure and fiber optic redundant ring network function, and providing fiber optic redundant long-distance transmission and relay functions for redundant dual-network systems. Shenzhen Xunji Technology Co., Ltd. is an industrial network equipment provider. The equipment adopts new technology, independent intellectual property rights, and launches products with innovative functions in the industry.

This device features dual-electric business and dual-fiber interface design, supports dual-network redundancy and fiber optic ring network, and supports point-to-point, star, chain bus, ring network and hybrid network structure. Long-distance fiber transmission of more than 20km breaks the distance limit of the cable system. The dual-electric business channel logic is independent, supporting 1~2 optical/electrical interfaces to be flexibly matched, According to the actual needs of the project, flexible configurations of 1 fiber optic interface + 1 data interface; 1 fiber optic interface + 2 data interfaces; 2 fiber optic interfaces + 1 data interface; 2 fiber optic interfaces + 2 data interfaces can be realized. The Ci-pf series is based on the standard Profibus DP. The rate is set by the DIP switch or the rate is adaptively set. It supports 10 common rates of the Profibus DP bus.

During the use of the Siemens SITOP power supply, it needs to be configured in the following way to obtain a reasonable and stable use effect. Its requirements are as follows:

1. The input end of the Siemens SITOP power supply needs a switch to turn on or off the power supply, and the ability to protect the line and power module is required. Generally, a small circuit breaker is suitable;

2. When the Siemens SITOP power supply is powered on, the power module will cause an input surge current due to the charging of the internal capacitor. This current will drop to the rated input current within a few milliseconds. In addition to the internal impedance of the power module, the input surge current depends largely on the supply voltage, the impedance of the power supply system, and the impedance of the cable. The *input surge current of each Siemens SITOP power supply has been listed in the power supply specification table, which is very important for the protection design value of the line side;

EndFragment-->

Please follow the following installation principles: standard modules (IM, SM, FM, CP) must be inserted into the slot on the left side of the isolation module, and the error-proof digital E/A module must be inserted into the slot on the right side of the isolation module. The logical base address of the defective module and 4 bytes of diagnostic data are contained in OB82's own local variables. Depending on the CPU used, this can be achieved through a jumper or a contact slider. For user-defined addressing of S7-300PLC, it is only applicable to CPU315, CPU315-2DP, CPU316-2DP and CPU318-2DP and CPU31xC. SM321 switch input template, slot 4, address 0--3; one switch input: manual automatic switching signal;

6SE7037-0EJ84-1JC2 driver board

(1) The other modules not marked with "only imported modules" in the table have both imported and domestic types of modules

(2) In the input/output type of EM223: 24V DC/24VDC -0.75A means: the input type is DC 24V,

the output type is DC 24V and the current per point is 0.75A

top of page

Module technical specifications

When using S7-200 digital modules, we need to understand many specific parameters of the module, such as: input and output type, number of input and output points, module power consumption, input/output point rated current, etc. You can obtain these specific parameters in the following documents:

"S7-200 Programmable Controller System Manual" Appendix A Technical Specification Table Table A-12 to Table A-14

How to query the technical data of Siemens products, please click to view

Among the many parameters, you need to pay special attention to the following two important parameters of the module:

? Module power consumption

? Output point switching frequency

Parameter 1: Module power consumption: mainly refers to the module's consumption capacity for 5V power supply and 24V power supply.

(1) 5V power consumption: The 5V power supply is supplied to the module by the CPU through the I/O bus cable. The 5V power supply cannot be supplemented or expanded by an external power supply. We need to calculate the sum of the 5V power consumption of all S7-200 digital modules to ensure that it does not exceed the CPU's 5V power supply capacity.

(2) 24V power consumption: Some S7-200 digital modules require 24V power supply for power supply, digital input points and output points. The 24V power supply can be provided by the 24V DC sensor output power supply of the CPU module, or an external 24V DC power supply can be added. Usually, we need to calculate the 24V power consumption of the S7-200 digital module to ensure that it does not exceed the power supply quota of the CPU module or select a 24V power supply module with the correct capacity.

EndFragment-->

4. Template function settings

This is because the DTR and RTS signals are defaulted to 0. You can call FC6 (V24_SET) in OB1. The parameters RTS and DTR are set to "TRUE".

The optional memory card can *save programs, data and configuration information. The typical event value of the optional battery card to save data is 200 days.

6SE7037-0EJ84-1JC2 driver board

Siemens input module 6SE7037-0EJ84-1JC2 driver board

6ES7193-4CC70-0AA0 SIMATIC DP, terminal module TM-P15N23-A1, for ET 200S, for power module, 15MM wide, fast connection terminal, 2X3, with
6ES7193-4CD20-0AA0 SIMATIC DP, terminal module TM-P15S23-A0, for ET 200S, for power module S1, 5 MM wide, screw terminal 2X3, with
6ES7193-4CD30-0AA0 SIMATIC DP, terminal module TM-P15C23-A0, for ET 200S, for power module, 15MM wide, spring terminal (cage clamp), 2X3 terminal
6ES7193-4CD70-0AA0 SIMATIC DP, terminal module TM-P15N23-A0, for ET 200S, for power module, 15MM wide, fast connection terminal 2X3, with
6ES7193-4CE00-0AA0 SIMATIC DP, terminal module TM-P15S22-01, for ET 200S, for power module S1, 5 MM wide, screw terminal 2X2, without
6ES7193-4CE10-0AA0 SIMATIC DP, terminal module TM-P15C22-01, for ET 200S, for power module, 15MM wide, spring terminal (cage clamp), 2 X 2 terminals
6ES7193-4CE60-0AA0 SIMATIC DP, terminal module TM-P15N22-01, for ET 200S, for power supply module, 15MM wide, quick-connect terminal, 2X2, without
6ES7193-4CF40-0AA0 SIMATIC DP, terminal module TM-E30S46-A1, for ET 200S, for electronic modules, 30MM wide, screw terminals 4X6, with

Siemens input module 6SE7037-0EJ84-1JC2 driver board

Sensors/actuators from explosion-proof zone 0 cannot be connected. But sensors/actuators from explosion-proof zone 1 can be directly connected.

52: How to avoid fluctuations in analog inputs in SM335 modules?

68: After the entire system loses power, why does the CPU remain in the stopped state after power is restored? The entire system consists of a DP master station S7-300/400 and slave stations.

6SE7037-0EJ84-1JC2 driver board

Siemens launches PSU8600 single-phase main power supply module for easy diagnosis and system configuration

? Single-phase 480W main power supply module, expanding the Sitop PSU8600 product line

? Integrated 4 5A outputs (DC 24V, 20A/4x5), all monitorable

? Up to 36 outputs can be monitored through modular expansion

? Integrated Ethernet/ Profinet interface, providing comprehensive diagnostic and maintenance information

Siemens will launch a SITOP PSU8600 single-phase 480W main power supply module, expanding the product line of this series. The new product integrates 4 outputs, each with a current of 5A, and the voltage of each output can be adjusted manually when the power supply is running, or remotely through software and controllers, with an adjustment range of 4V to 28V, so no additional power supply is required to support 5V or 12V voltage devices. By using the CNX8600 expansion module, it can be expanded to *36 outputs, and all outputs can be remotely monitored. PSU8600 can be fully integrated into the TIA Portal engineering platform, thus facilitating the rapid implementation of automation engineering. Parameter setting and remote diagnosis can be performed directly on a computer through the Sitop Manager software. With two integrated Ethernet/Profinet ports and OPC UA, users can obtain comprehensive diagnostic and maintenance information and analyze it directly in the automation system, thereby quickly locating faults and reducing downtime.

Step 3: Link the configured slave to the master and assign a diagnostic address, such as 1022.

The programming device PG is used to program the S7-300PLC.

27: Diagnostic address when the CPU315-2DP is used as a slave and the CPU315-2DP is used as a master?

I think you'll find our product offers great value for money！

It's my pleasure to introduce our latest product, which will be a great addition to your current offerings！

We're thrilled to introduce you to our latest product, which we believe will meet your needs perfectly！

We believe this product can help to expand your market share. We look forward to the opportunity to work with you！

We sincerely welcome your calls and consultations and provide you with quality service 24 hours a day！

· Many products are not yet on the shelves please contact us for more products.

· If there is inconsistency between the product model and the display picture, the model shall prevail, please contact us for specific product pictures, we will arrange to take pictures in the warehouse to confirm!

.Technical Team Service Hotline：wujinghan102@gmail.com     +86 13376990653

                                                         csyili980622@gmail.com        +86 13306931261